| |
| |
Untitled Document
 |
|
EDI will be attending the following
Conferences and Trade Shows |
|
|
January 28 – 30, 2008
TechCon 2008 TJ/H2B Chateau Elan Winery
and Resort
Braselton , Georgia |
 |
| |
|
|
February 11-12, 2008
ABB School of Maintenance Transformer Monitoring Technologies Johannesburg South Africa |
 |
| |
|
|
March 2008
Doble Users Conference
Boston MA |
 |
| |
|
 |
April 21, 22, 23 2008
IEEE Transmission and Distribution
Chicago, IL
|
| |
|
|
|
|
|
|
|
Rotating Machine Diagnostic Monitor - RTM
Brochure and Specifications
- 15 Channel Continuous Partial Discharge Monitor (PDM)
- Up to Six motors can be monitred with one system by adding addition PDM's.
- USB, Ethernet and RS-485 ModBus communication Interfaces
- Accept auxiliary inputs such as temperatures, humidity, flux probes, shaft currents and VIBRATION
- Outputs include 4 dry contacts and a 4 - 20 ma signal.
- Highly configurable
The RMM (Rotating Machine Monitor) is a microprocessor-based device that continuously monitors the insulation system for partial discharges as well as other parameters such as power, thermal and mechanical condition of a medium voltage motor, turbine generator or Hydro generator. The basic standalone unit shown in the picture consists of three modules (from the left to the right): Power Supply, main CPU module and a 15-channel partial discharge module.
 The basic unit may be extended with additional modules allowing for more economical or accurate way of monitoring multiple objects. RMM can have up to six PD modules allowing monitoring up to six motors (within allowable signal cable distance) with one monitor. A separate vibration module may be installed and used in conjunction with the four vibration signal channels already
located on the main CPU module. This will allow for remote vibration monitoring of the machine and the load if other vibration monitoring equipment is not installed. |
|
